Legrand Evolution Series Hinged Wall Box v.1 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Legrand Evolution Series Hinged Wall Box v.1. Legrand Evolution Series Hinged Wall Box v.1 User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 8
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
WIREMOLD
®
Evolution
Series Wall Box
Boîtier mural de la série Evolution
Caja de pared serie Evolution
IMPORTANT:
Please read all instructions before
beginning installation
Legrand electrical systems conform to and
should be properly grounded in compliance with
requirements of the current National Electrical
Code or codes administered by local authorities.
All electrical products may present a possible
shock or fire hazard if improperly installed or used.
Legrand electrical products may bear the mark of
a Nationally Recognized Testing Laboratory and
should be installed in conformance with current
local and/or the National Electrical Code.
IMPORTANT :
VEUILLEZ LIRE L'ENSEMBLE
DES INSTRUCTIONS AVANT DE
COMMENCER L'INSTALLATION.
Les systèmes électriques Legrand sont
conformes au Code National de l'électricité
(National Electrical Code) ou aux codes
locaux en vigueur et doivent être mis à la terre
conformément à ces codes.
Tous les produits électriques peuvent présenter
un risque d'électrocution ou d'incendie s'ils ne
sont pas installés ou utilisés correctement. Les
produits électriques Legrand peuvent porter la
marque d'un laboratoire reconnu et doivent être
installés conformément au Code national de
l'électricité et/ou aux codes locaux en vigueur.
IMPORTANTE:
Lea todas las instrucciones antes
de comenzar la instalación.
Los sistemas eléctricos Legrand cumplen con los
requisitos del Código Eléctrico Nacional (National
Electrical Code, NEC) actual o con los códigos
impuestos por las autoridades locales y deben
conectarse a tierra consecuentemente.
Todos los productos eléctricos pueden presentar
un riesgo de descarga o incendio si se los instala o
utiliza incorrectamente. Los productos eléctricos
Legrand pueden llevar la marca de un laboratorio
de pruebas reconocido a nivel nacional y se deben
instalar conforme al código local en vigencia o al
Código Eléctrico Nacional.
No: 1013400 – 03 15
Installation Instructions • Notice d’Installation• Instrucciones de Instalación
Catalog Number(s) • Numéro(s) de catalogue • Número(s) de catálogo:
Wall Boxes • Boîtiers muraux • Cajas de pared: EHWB4, EHWB 8
Covers • Couvercles • Tapas: EHWBC4, EHWBC8
Country of Origin • Pays d'origine • País de origen:
Boxes • Boîtiers • Cajas: Made in USA • Fabriqué en USA • Hecho en USA
Covers • Couvercles • Tapas: Made in USA • Fabriqué en USA • Hecho en USA
Wall Structure: Drywall over 2" x 4" Stud Framing
Structure murale : Cloison sèche sur ossature à montant de 51 mm x 102 mm (2 po x 4 po)
Estructura de la pared: Mampostería sobre marcos de montantes de 5 x 10 cm (2" x 4")
Components Included 4-Gang Box:
Composants inclus dans le boîtier quadruple :
Componentes incluidos en la caja de 4 juegos:
A.
Enclosure Base • Base du coffret • Base del gabinete
B.
Knockout Plates • Plaques d'éjection • Placas con troqueles
C.
Mounting Brackets (2) Old Work
Supports de fixation (2) Ancien ouvrage
Soportes de montaje (2) Construcción existente
D.
Mounting Brackets (2) New Work
Supports de fixation (2) Nouvel ouvrage
Soportes de montaje (2) Construcción nueva
E.
Device Bracket • Support de l'appareil • Soporte del dispositivo
F.
Divider • Séparateur • Separador
G.
Temporary Cover • Couvercle provisoire • Cubierta temporal
H.
#8-32 Screws (14) • Vis n° 8-32 (14) • Tornillos N.° 8-32 (14)
I.
#6-32 Screws (2) • Vis n° 6-32 (2) • Tornillos N.° 6-32 (2)
J.
Filler Plates (2) • Plaques de remplissage (2) • Placas de relleno (2)
A
B
C
E
D
F
G
J
I
H
B
C
D
Przeglądanie stron 0
1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Caja de pared serie Evolution

WIREMOLD® Evolution™ Series Wall BoxBoîtier mural de la série Evolution™Caja de pared serie Evolution™IMPORTANT: Please read all instructions before

Strona 2 - OLD WORK INSTALLATION:

2Components Included 8-Gang Box: Composants inclus dans le boîtier octuple :Componentes incluidos en la caja de 8 juegos:A. Enclosure Base • Base du c

Strona 3

32Remove device bracket and compartment divider to provide access to inside of enclosure.Retirez le support de l'appareil et le séparateur du com

Strona 4

45Run your cable to the opening cut in the drywall, feed the cable into the enclosure through the appropriate opening.Acheminez votre câble dans l&apo

Strona 5 - Placa de relleno

58Wire and install devices as required. The enclosure accepts standard NEMA type devices and faceplates (2 3/4" x 4 1/2" [70mm x 114mm]). Le

Strona 6 - NEW WORK INSTALLATION:

61Remove screws securing the “Temporary Cover” to the enclosure base.Retirez les vis qui maintiennent le « couvercle provisoire » sur la base du coffr

Strona 7

74Determine the location for the box to be installed and secure the box the wall framing using four (4) drywall screws (not provided). Holes in the mo

Strona 8

No: 1013400 0315© Copyright 2015 Legrand All Rights Reserved.© Copyright 2015 Tous droits réservés Legrand.© Copyright 2015 Legrand Todos los derecho

Komentarze do niniejszej Instrukcji

Brak uwag